LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Sidekick JS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> TPS R & I (Samurai, Sidekick) >> Installation (Samurai & Sidekick)

Installation (Samurai & Sidekick)

  1. If wiring harness was removed from connector, insert wires into connector.
  2. Install TPS so its adjusting holes slightly cover mounting bolt holes. See Figure . Turn TPS so mounting holes align. Install TPS mounting bolts and finger tighten only.
  3. Clamp wiring harness securely to side of throttle body. Connect negative battery cable. Adjust TPS. See ADJUSTMENTS article. Torque TPS mounting bolts to 31 INCH lbs. (3.5 N.m).
scientia non olet · About LEMON Manuals