LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1989 >> Sidekick JA, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Remove/Install/Overhaul >> Throttle Position Sensor (TPS) >> Installation

Throttle Position Sensor (TPS): Installation

  1. If wiring harness was removed from coupler, insert wires into coupler.
  2. Install throttle position sensor so its adjusting holes slightly cover mounting bolt holes. See Fig 1 Turn sensor so mounting holes align. Install sensor mounting bolts and finger tighten only.
  3. Clamp wiring harness securely to side of throttle body. Connect battery. Adjust TPS. Tighten mounting bolts to 31 INCH lbs. (3.5 N.m). To adjust throttle position sensor, see ADJUSTMENTS article in this section.
Fig 1: Aligning Sidekick Throttle Position Sensor
G119659Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals