LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Heater And Ventilation) >> Repair Instruction >> Air Inlet Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the air inlet assembly.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the air inlet assembly screws.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

    Fig 1: Identifying Recirculation Actuator Screws
    G04844378Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the recirculation actuator.
  4. Install the recirculation actuator screws.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

  5. Install the electrical connector to the recirculation actuator.
  6. Install the HVAC module. Refer to HVAC MODULE ASSEMBLY REPLACEMENT .
scientia non olet · About LEMON Manuals