LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Outback Base >> Repair and Diagnosis >> Steering >> Electronic Steering >> Power Steering System >> Tie-rod end >> Removal

Tie-rod end: Removal

  1. Remove the front wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>REMOVAL .
  2. Disconnect the tie-rod end.
    CAUTION: Be careful not to damage the boot of the ball joint.
    1. Remove the cotter pin (a).
    2. Remove the castle nut (b).
    3. Using a ball joint puller (d), remove the tie-rod end (c).
    G13620850Courtesy of SUBARU OF AMERICA, INC.
  3. Loosen the lock nut, and remove the tie-rod end.
G13620805Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals