LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Fuel Injection System (2.4L)) >> Oil Control Solenoid >> Removal >> Exhaust

Oil Control Solenoid: Removal: Exhaust

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>REMOVAL .
  3. Disconnect the connector (A) and remove the oil control solenoid.
    G14601027Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the O-ring and back-up ring from the oil control solenoid.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the reservoir tank. Ref. to COOLING (H4DOTC)>RESERVOIR TANK>REMOVAL .
  3. Disconnect the connector (A) and remove the oil control solenoid.
    G14601028Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the O-ring and back-up ring from the oil control solenoid.
scientia non olet · About LEMON Manuals