LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Cooling System (2.4L)) >> Radiator Fan and Fan Motor Assembly >> Disassembly

Radiator Fan and Fan Motor Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator fan harness.
    G13620603Courtesy of SUBARU OF AMERICA, INC.
  2. Remove each radiator fan control unit.
    G13620604Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the main fan motor harness and the sub fan motor harness.
    G13620605Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the radiator main fan and radiator sub fan.
    CAUTION: Nuts with reverse threads are used for securing radiator main fan and radiator sub fan. Therefore, rotate them in the clockwise direction when removing.
    NOTE: Remove locking agent from the thread of the main fan motor and the sub fan motor.
    G13620606Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the main fan motor and the sub fan motor.
    G13620607Courtesy of SUBARU OF AMERICA, INC.
  6. Peel off the radiator fan shroud gasket RH and radiator fan shroud gasket LH.
NOTE: This procedure is required only when the radiator fan shroud gasket RH and radiator fan shroud gasket LH are to be replaced.
G13620608Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals