LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Rear Regulator and Motor Assembly >> Removal

Rear Regulator and Motor Assembly: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel rear door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>REMOVAL>REAR DOOR .
  3. Remove the rear sealing cover. Ref. to EXTERIOR BODY PANELS>SEALING COVER>REMOVAL>REAR SEALING COVER .
  4. Remove the glass assembly rear door. Ref. to GLASS/WINDOWS/MIRRORS>REAR DOOR GLASS>REMOVAL .
  5. Remove the regulator and motor assembly rear.
    1. Disconnect the regulator & motor assembly rear connector.
    2. Remove the bolts, and then remove the regulator and motor assembly rear.
      G13625416Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals