LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Legacy Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Front Disc Rotor >> Installation

Front Disc Rotor: Installation

NOTE: Before installation, remove mud and foreign matter from the disc brake assembly front.
  1. Check the brake disc front. Ref. to BRAKE>FRONT DISC ROTOR>INSPECTION .
  2. Press back the piston disc brake with a disc brake piston tool as needed.
    CAUTION: When pressing back the piston disc brake, the clearance between pad disc brake and brake disc becomes large, which makes the brake pedal effort softer. After the installation of front wheel, be sure to perform the adjustment of the clearance and the pedal effort by depressing the brake pedal several times.
  3. Install the brake disc front.
  4. Use new mounting bolts to install the disc brake assembly front.

    Tightening torque: 

    135 N.m (13.8 kgf-m, 99.6 ft-lb)

  5. Install the brake hose bracket.

    Tightening torque: 

    33 N.m (3.4 kgf-m, 24.3 ft-lb)

  6. Install the front wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>INSTALLATION .
scientia non olet · About LEMON Manuals