Door Inner Remote: Installation: Rear

Before installation, check the following items.
- Cable is free from deformation such as fray.
- Grease is applied sufficiently to cable joints.
  If grease is insufficient, add it as necessary before assembling the cable.
  
  Preparation items:
  
  Grease: Silicone grease G-30M (part No. 004404002) or equivalent
Install the remote assembly door.
Install the trim panel rear door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .