General Tool
WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| TOOL NAME | REMARKS |
|---|---|
| Steering wheel puller | Used for removing the steering wheel. |
| Inspection weight | Used for sensitivity inspection after sensor rezero adjustment operation. Prepare an inspection weight of 30 kg to 40 kg in total. If it is a weight of which the accuracy has been verified (within ±0.5%), there is no need of measuring the actual value using a digital scale.
NOTE:
The combination of 98399AG000 and 98399AG010 (total weight: 35.812 kg) can also be used.
|
| Digital scale | Used only for sensitivity inspection after sensor rezero adjustment operation, using an inspection weight of which the actual weight is not verified or unknown. |
| TORX® T40 | Used for removing and installing the beam COMPL - steering. |
| Circuit tester | Used for measuring resistance, voltage and current. |
| Nippers | Used for cutting the harness. |
| Wire stripper | Used for peeling off the shield of harness. |