Driver Monitoring Unit: Installation

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When replacing the driver monitoring unit, perform the variant work. Ref. to DRIVER MONITOR (DIAGNOSTICS)>WORK SUPPORT>OPERATION .
Make sure the electrical connector is connected securely.
Make sure that driver monitoring unit operates normally.

Install the driver monitoring unit.
Install the grille speaker assembly CTR.
Install the grille ventilation assembly center.
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
When the driver monitoring unit has been replaced, read the [Driver Monitor] customizing information. Ref. to COMMON DIAGNOSTIC OPERATIONS>CUSTOMIZE>OPERATION>SAVE SETTINGS / READ SETTINGS