LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Lighting System) >> Back-up Light Bulb >> Removal

Back-up Light Bulb: Removal

WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover assembly rear combination light.
    1. Release the clip and hook, and then remove the cover assembly rear combination light.
      G13200822Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the light assembly combination rear.
    1. Release the bolts and clips, then pull out the light assembly combination rear to the vehicle rear as shown in the figure.
      CAUTION: Be careful not to damage the clips.
      G13200823Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect the connector and remove the light assembly combination rear.
  4. Rotate in the direction of arrow shown in the figure to remove the bulb socket.
  5. Remove the back-up light bulb.
    G13200827Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals