LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Power Rear Gate System) >> Power Rear Gate Inner Switch >> Removal

Power Rear Gate Inner Switch: Removal

WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cap panel rear gate switch.
    1. Release the claws and pull out the cap panel rear gate switch rearward.
      CAUTION: When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around the tool, and be careful not to cause damage.
      NOTE: Insert flat tip screwdrivers wrapped with protective tape into the slits on both sides.
      G16387665Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect the connector and remove the cap panel rear gate switch.
  3. Release the claws and remove the power rear gate inner switch and the power rear gate lock switch.
G13227257Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals