Inspection Mode H
WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Condition |
|---|---|---|
| P0746 | PRESSURE CONTROL SOLENOID "A" PERFORMANCE/STUCK OFF | - |
| P0747 | PRESSURE CONTROL SOLENOID "A" STUCK ON | - |
| P2723 | PRESSURE CONTROL SOLENOID "E" PERFORMANCE/STUCK OFF | - |
Diagnostic procedure:
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed.
- Start the engine.
- Drive in any driving pattern for 20 minutes. (Include driving at a constant legal speed (for 20 seconds) at least once.)
- Turn the ignition switch to OFF, and wait for 30 seconds or more.
- Start the engine.NOTE: Repeat two driving cycles in this driving pattern.