Inspection Mode G
WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Condition |
|---|---|---|
| P0719 | BRAKE SWITCH "B" CIRCUIT LOW | - |
| P0724 | BRAKE SWITCH "B" CIRCUIT HIGH | - |
| P0951 | AUTO SHIFT MANUAL CONTROL CIRCUIT RANGE/PERFORMANCE | - |
Diagnostic procedure:
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed.
- Start the engine.
- Operate the stop light switch or the manual mode switch.NOTE: Drive in "D" range and "R" range.
- Read the data of the stop light switch or the manual mode switch using the Subaru Select Monitor. Or measure the terminal voltage.