Inspection Mode 2
WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B2784 | Antenna circuit (Push Engine Switch) | - |
| B2790 | ID Code Box circuit | - |
| B27A1 | Driver side external antenna open | - |
| B27A2 | Passenger side external antenna open | - |
| B27A5 | Front internal antenna open | - |
| B27A6 | Rear internal antenna open | - |
| B27A7 | Trunk/rear gate internal antenna open | - |
| B27A8 | Trunk/rear gate external antenna open | - |
Diagnostic procedure:
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
- Using the Subaru Select Monitor, perform the clear memory of [Keyless Access with Push Button Start]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Using Subaru Select Monitor, read the DTC of [Keyless Access with Push Button Start] to check that there is no DTC displayed. Ref. to KEYLESS ACCESS WITH PUSH BUTTON START (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.