LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Anti-Theft System - Security And Locks) >> Rear Lock Button >> Removal

Rear Lock Button: Removal

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The rear lock button is integrated with the switch opener rear gate.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>REMOVAL .
  3. Remove the switch opener rear gate. Ref. to SECURITY AND LOCKS>REAR GATE OPENER BUTTON>REMOVAL .
  4. Remove the switch request (lock).
    CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
    1. Remove the screws, and remove the garnish assembly rear gate LWR.
    2. Remove the screws, and remove the switch request (lock).
G13201479Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals