LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Anti-Theft System - Security And Locks) >> Keyless Transmitter >> Replacement >> Registration Of Keyless Transmitter With SUBARU Select Monitor

Registration Of Keyless Transmitter With SUBARU Select Monitor

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • A maximum of four keyless transmitters can be registered for each individual vehicle.
  • When replacing or adding the keyless transmitter, new registration of transmitter is necessary.
  1. Register the keyless transmitter using the Subaru Select Monitor.
    1. Using the Subaru Select Monitor, select [Keyless ID registration] from the work support item list of [Keyless Entry]. Ref. to KEYLESS ENTRY (DIAGNOSTICS)>WORK SUPPORT .
    2. According to the directions on the screen, press the button of the transmitter to be registered in order of Lock → Unlock. (When registration completed: Outside buzzer sounds once.)
      NOTE:
      • Repeat the procedure as many times as the number of transmitters to be registered.
      • When attempting to register a key that has already been registered, the external buzzer sounds twice.
    3. Press the Exit button to finish the operations.
scientia non olet · About LEMON Manuals