LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Anti-Theft System - Security And Locks) >> Keyless Access Control Module >> Removal

Keyless Access Control Module: Removal

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. When replacing the keyless access Control Module, store the [Keyless Access with Push Button Start(Collation)] customizing information. Ref. to COMMON (DIAGNOSTICS)>CUSTOMIZE>OPERATION > SAVE SETTINGS / READ SETTINGS
  2. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the cover side sill front FR and the cover side sill front RR. Ref. to EXTERIOR/INTERIOR TRIM>LOWER INNER TRIM>REMOVAL .
  4. Remove the pocket COMPL and the panel instrument passenger. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>REMOVAL .
  5. Remove the keyless access Control Module.
    CAUTION: Be careful to keep water and other foreign materials away from the keyless access Control Module terminals.
    1. Remove the bolts and pull out the keyless access Control Module.
    2. Disconnect the connector.
G13201481Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals