Rear Alignment (Inspection Value)
WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| Suspension height (Tolerance: +24 mm-12 mm (+0.94 in-0.47 in )) | mm (in) | -60 (-2.36) |
| Camber (tolerance: ±0°45' Differences between RH and LH: 45' or less) | -0°30' | |
| Toe-in | mm (in) | IN3±3 (IN0.12±0.12) |
| Toe angle (sum of both wheels): IN0°14'±14' | ||
| Thrust angle (tolerance: 0°00'±30') | 0°00' | |
NOTE:
- Adjustment must be within the adjustment value, taking aging variation into consideration. FRONT SUSPENSION>WHEEL ALIGNMENT>ADJUSTMENT
- Front toe-in, rear toe-in and front camber can be adjusted. Adjust if the value of toe-in or camber exceeds the tolerance range of the specification chart.
- Other items except for front toe-in, rear toe-in and front camber that are described in the specification chart cannot be adjusted.
- If other items exceed the tolerance range of the specification chart, check the suspension parts and connections for deformation. If defective, replace them with new parts.
A - B = Positive: Toe-in, Negative: Toe-out
α = Individual toe angles