Power Amplifier: Removal

WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .

NOTE: Remove the power amplifier assembly after sliding the passenger's seat back and forth as necessary.

Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Remove the power amplifier assembly.
1. Remove the harness clip, and disconnect each connector.
2. Remove the nut and remove the power amplifier assembly.

Courtesy of SUBARU OF AMERICA, INC.