LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Entertainment System) >> Accessory Power Supply Socket >> Installation >> Rear

Accessory Power Supply Socket: Installation: Rear

WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Install the socket assembly.
    NOTE: Align the groove of the trim panel assembly apron LH with the claw of the socket assembly.
  2. Install the trim panel assembly apron LH. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION .
  3. Install the third-row seats. Ref. to SEATS>THIRD SEAT>INSTALLATION .
  4. Install the floor mat side, floor mat center, and box sub trunk assembly.
    NOTE: Be sure to install the clips of the backrest backside mat.
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals