Pitching Stopper

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Install the pitching stopper bracket.

Tightening torque:

41 N.m (4.2 kgf-m, 30.2 ft-lb)

Courtesy of SUBARU OF AMERICA, INC.

Install the bolts which secure the CVTF cooler pipe No. 1.

Tightening torque:

16 N.m (1.6 kgf-m, 11.8 ft-lb)

Courtesy of SUBARU OF AMERICA, INC.

Install the pitching stopper.
NOTE: Install with the front mark (a) facing towards the front of the vehicle.

Tightening torque:

T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)

T2: 58 N.m (5.9 kgf-m, 42.8 ft-lb)

Fig 1: Pitching Stopper Bolts With Torque Specification
Courtesy of SUBARU OF AMERICA, INC.
Install the pitching stopper plate.
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Connect the ground cord.
1. Connect the coupling connector.
2. Install the clips.
Install the air breather hose to the air breather hose bracket.
Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>INSTALLATION .