LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (CVT Transaxle System) >> Front Reduction Drive Gear >> Disassembly

Front Reduction Drive Gear: Disassembly

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seal rings.
    G13622371Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing (rear side) using ST1, ST2 and a press.
    CAUTION: Be careful not to drop the front reduction drive gear.

    Preparation tool: 

    ST1: REMOVER (899864100)

    ST2: REMOVER (498077400)

    G13622372Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the ball bearing (front side) using the ST and a press.
    CAUTION: Be careful not to drop the front reduction drive gear.

    Preparation tool: 

    ST: REMOVER (498077600)

    G13622373Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals