LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2025 >> Forester Wilderness >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (CVT Transaxle System) >> Front Reduction Drive Gear >> Assembly

Front Reduction Drive Gear: Assembly

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the ST and a press, press-fit a new ball bearing (front side).
    NOTE: Apply CVTF to the press-fitting area.

    Preparation tool: 

    ST: INSTALLER (18651AA000)

    G13622374Courtesy of SUBARU OF AMERICA, INC.
  2. Press-fit a new ball bearing (rear side) using ST1, ST2 and a press.
    NOTE: Apply CVTF to the press-fitting area.

    Preparation tool: 

    ST1: INSTALLER (499757002)

    ST2: INSTALLER (398177700)

    G13622375Courtesy of SUBARU OF AMERICA, INC.
  3. Install a new seal ring.
    NOTE:
    • Apply CVTF to the seal rings.
    • Do not stretch the seal ring more than necessary.
    G13622371Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals