Mass Air Flow and Intake Air Temperature Sensor: Installation

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Install the mass air flow and intake air temperature sensor, and connect the connector.
CAUTION:
- When reusing the mass air flow and intake air temperature sensor, check the O-ring and install it so that it is not damaged or get caught.
- If the O-ring is faulty, replace it with a new mass air flow and intake air temperature sensor.
Tightening torque:

1 N.m (0.1 kgf-m, 0.7 ft-lb)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .