Clearing History

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

With this procedure, the following data can be initialized.

Data monitor history items

On [Start] screen, select [Diagnosis].
On [Vehicle selection] screen, input the target vehicle information and select [OK].
On [Main Menu] screen, select [Each System].
On [Select System] screen, select [Power Window (Driver)], [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)], and then select [Enter].
On [Select Function] screen, select [Work Support].
On [Work Support] screen, select [Initialization Mode].
On [Initialization Mode] screen, select [History Clear].
Perform operation following directions in the Subaru Select Monitor.