Seat System - Seats: General Description: Caution

When performing service operation, refer to "Repair Contents" in "General Description". Ref. to REPAIR CONTENTS>REPAIR CONTENTS .
Refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM" article. Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
When performing work on the sensors or modules, be careful of the following.
- Before disconnecting electrical connectors, be sure to disconnect the ground terminal from the battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Do not apply any impact. If the parts are accidentally dropped, replace with a new part.
- Do not expose to high-temperature and humidity.
When replacing the parts provided with memory functions, record the memory contents before disconnecting the ground terminal from the battery sensor.
Be careful not to damage the vehicle when taking out the seat from the vehicle.
Before assembling, make sure how the harnesses such as side airbag harness and front seat belt INN
harness are routed in order to avoid mis-arranging. Assembling with harnesses improperly routed may cause the harness to get caught and short out.
When disassembling the passenger's seat, be careful of the following.
- Do not remove the load sensor from the passenger's seat cushion frame assembly. It is fixed to the cushion frame assembly.
- When the cushion frame assembly of the passenger's seat is replaced, do not touch the load sensor.
  Failure to do so may electrically impair it.