LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Outback Touring XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Cooling System (2.5L)) >> Active Grille Shutter >> Installation

Active Grille Shutter: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the ambient sensor.
    G16383813Courtesy of SUBARU OF AMERICA, INC.
  2. Install the active grille shutter.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

    G16383812Courtesy of SUBARU OF AMERICA, INC.
  3. Connect the connector to the active grille shutter actuator.
    G16383811Courtesy of SUBARU OF AMERICA, INC.
  4. Connect the connector to the ambient sensor.
    G16383810Courtesy of SUBARU OF AMERICA, INC.
  5. Install the bumper face front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT BUMPER>INSTALLATION .
  6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  7. When the active grille shutter has been replaced, perform the calibration (execute the system operation check for ACTGS control). Ref. to ENGINE (DIAGNOSTICS) (H4DO)>ACTIVE TEST .
scientia non olet · About LEMON Manuals