LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Speed Control System (2.4L)) >> Accelerator Pedal >> Installation >> Accelerator Pedal Assembly

Accelerator Pedal Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the accelerator pedal assembly, and connect the connector.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

    G16383867Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals