LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Noise Suppressor >> Removal >> Outback Model

Outback Model

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>SAFETY .
  2. Remove the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>REMOVAL .
  3. Remove the noise suppressor assembly.
    1. Remove the hose assembly rear washer from the hose clamp.
    2. Disconnect the connectors and remove the connector clips and harness clips.
    3. Remove the bolts, then remove the noise suppressor assembly.
    G13952110Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals