LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Outback Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Detection/Rear Cross Traffic Alert System (Diagnostics) >> Control Module I/O Signal >> Electrical Specification >> Radar Sensor

Radar Sensor

G13627579Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Contents Measuring condition Standard
Radar sensor LH (master) Radar sensor RH (slave)
(L107) or (R104) No. 1 ←→ Chassis ground Private CAN H Private CAN H Always 1 MΩ or more
(L107) or (R104) No. 2 ←→ Chassis ground Vehicle CAN H - Always 1 MΩ or more
(L107) or (R104) No. 3 - - - -
(L107) or (R104) No. 4 ←→ Chassis ground Left mirror LED output Right mirror LED output
  • Ignition switch OFF → ON
  • BSD/RCTA OFF button OFF → ON (while touching the button)
  • When indicator is ON: 2.5 - 10.5 V
  • When indicator is blinking: 0 ←→ 2.5 - 10.5 V
  • When indicator is OFF: Less than 1 V
(L107) or (R104) No. 5 ←→ Chassis ground Ignition power supply Ignition power supply Ignition switch OFF → ON Less than 1 V → 9 - 16 V
(L107) or (R104) No. 6 ←→ Chassis ground Private CAN L Private CAN L Always 1 MΩ or more
(L107) or (R104) No. 7 ←→ Chassis ground Vehicle CAN L - Always 1 MΩ or more
(L107) or (R104) No. 8 - - - -
(L107) or (R104) No. 9 - - - -
(L107) or (R104) No. 10 ←→ Chassis ground GND GND Always Less than 1 Ω