AWD Warning Light Display: Inspection
- At normal condition
Always light OFF
- When FF mode is selected
AWD light illuminates when the AWD ON/OFF switching function is set to "FF mode" with the ignition switch ON.
- When malfunction is detected
AWD light blinks at 2 Hz when any of the following malfunctions are detected with the ignition switch ON.
- When tire with different diameter is installed, or air pressure of any of four wheels is excessively low.
- NG judgment for [Rear differential inspection mode] Ref. to DIFFERENTIALS>REAR DIFFERENTIAL INSPECTION MODE .
| (A) | Ignition switch condition |
| (1) | At normal condition |
| (2) | When FF mode is selected |
| (3) | When malfunction is detected |
If the illumination patterns are not as above, check the AWD light circuit.