Dealership Mode: Setting

On the dealership mode menu, click "Settings" to display the following items.

Memory initialization
- Initialize the memory.
Camera setting
- Settings initialization: Initialization of camera settings.
- Static Guide Line: Guide line settings.
- CAUTION: Caution (RAB alert interruption message) settings.
- Camera setting: Camera view location and size are displayed based on the normal camera screen.
DMS demonstration mode (only for models with navigation)
NOTE:
- DMS demonstration mode setting can be switched ON/OFF using the toggle switch.
- Initial value of this switch is "OFF".
- When ACC is turned off, the switch is reset to initial setting (OFF) unless the user actively turns the switch to OFF.
Security mode pass code reregistration
Security mode pass code reset confirmation screen.

When the "OK" button is pressed, the security mode pass code reset screen is displayed.
NOTE:
- For North America destinations, "Security Mode" is displayed as "Valet Mode".
- For North America destinations, this button is not displayed when a subscription including the words "Valet Alert Mode Notification" is selected on the telematics subscription menu. In this case, pass code reset is performed by means of the clear operation from the smartphone app.
- For Europe, Australia, and general model destinations, "Security Mode" is displayed as "PIN Code Lock".
Satellite date/time setting (displayed only for models with 11.6-inch display.) The year, month, and day information can be set manually.
The current date and time sent from the GNSS receiver are displayed as "DD/MM/YYYY hh:mm:ss".

The date "DD/MM/YYYY" part can be changed by pressing the up/down buttons.

Settable range: 01/01/2018 - 31/12/2099
NOTE:
- If a future date/time was received due to a GPS problem, it will not be possible to update the date/time information even when the correct information is later received.
- This setting can be manually set to the correct date/time in dealership mode.