Fail Safe: List
If any of the following DTCs are stored, the system enters the fail safe mode.
| DTC | Failsafe operation | Failsafe deactivation condition |
|---|---|---|
| B112A | FAULT state occurs and the recognition result value is set to the value for when DMS is not normal. | After the condition returns to normal, turn the ignition switch to ON again. |
| B112B | ||
| B112C | ||
| B112D | ||
| B112E | ||
| B1140 | ||
| B1141 | ||
| B118A | ||
| B118B | ||
| B118C | ||
| B118D | ||
| B118E | ||
| B118F | ||
| B11E5 | ||
| B11E6 | ||
| B11E7 | ||
| B11E8 | ||
| B11E9 | ||
| B11EA | ||
| B1200 | HALT state occurs and the recognition result value is set to the value for when DMS is not normal. | Restored to the normal condition. |
| U0074 | ||
| U0101 | FAULT state occurs and the recognition result value is set to the value for when DMS is not normal. | After the condition returns to normal, turn the ignition switch to ON again. |
| U0122 | ||
| U0128 | ||
| U0140 | ||
| U0155 | ||
| U0162 | ||
| U0402 | ||
| U0416 | ||
| U0417 | ||
| U0422 | ||
| U0423 | ||
| U0463 | ||
| U1120 | ||
| U1146 | ||
| U1283 | ||
| U1469 | ||
| U1584 |