Inspection Mode 8
| DTC | Description & trouble part | Note |
|---|---|---|
| B1017 | COLLISION DETECTION SIGNAL INPUT | - |
| B1107 | CAN COMMUNICATION (BIU) STUCK | - |
| B1402 | IMMOBILIZER KEY COLLATION | Without keyless access with push button start system Ref. to IMMOBILIZER (DIAGNOSTICS)>INSPECTION MODE>PROCEDURE . |
| B1403 | IMMOBILIZER SUB CONTROL MODULE COLLATION | |
| B1404 | IMMOBILIZER SUB CONTROL MODULE COMMUNICATION | |
| B140A | IMMOBILIZER SUB CONTROL MODULE NON-VOLATILE MEMORY | |
| B1410 | TRANSPONDER COMMUNICATION | |
| B1411 | IMMOBILIZER ANTENNA | |
| U0073 | CONTROL MODULE COMMUNICATION BUS OFF | - |
| U0074 | CONTROL MODULE COMMUNICATION BUS "BODY-CAN" OFF | - |
| U0100 | LOST COMMUNICATION WITH ECM/PCM "A" | - |
| U0101 | LOST COMMUNICATION WITH TCM | - |
| U0122 | LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULE | - |
| U0127 | LOST COMMUNICATION WITH TIRE PRESSURE MONITOR CONTROL MODULE AND/OR KEYLESS ENTRY CONTROL MODULE | Without keyless access with push button start system |
| U0128 | LOST COMMUNICATION WITH PARK BRAKE CONTROL MODULE | - |
| U0155 | LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE | - |
| U0164 | LOST COMMUNICATION WITH HVAC CONTROL MODULE | - |
| U0167 | LOST COMMUNICATION WITH IMMOBILIZER CONTROL MODULE | With immobilizer control module |
| U0222 | LOST COMMUNICATION WITH DRIVER'S DOOR POWER WINDOW | - |
| U0223 | LOST COMMUNICATION WITH PASSENGER'S DOOR POWER WINDOW | - |
| U0327 | SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE | With keyless access with push button start system |
| U0401 | INVALID DATA RECEIVED FROM ECM/PCM "A" | - |
| U0402 | INVALID DATA RECEIVED FROM TCM | - |
| U0416 | INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULE | - |
| U0417 | INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE | - |
| U0423 | INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE | - |
| U0424 | INVALID DATA RECEIVED FROM HVAC CONTROL MODULE | - |
| U0426 | INVALID DATA RECEIVED FROM IMMOBILIZER CONTROL MODULE | With immobilizer control module |
| U0427 | INVALID DATA RECEIVED FROM VEHICLE SECURITY CONTROL MODULE | With keyless access with push button start system |
| U0430 | INVALID DATA RECEIVED FROM TIRE PRESSURE MONITOR CONTROL MODULE AND/OR KEYLESS ENTRY CONTROL MODULE | Without keyless access with push button start system |
| U1283 | LOST COMMUNICATION WITH EYESIGHT SA-BUS | - |
| U1584 | INVALID DATA RECEIVED FROM EYESIGHT SA-BUS | - |
| U1674 | LIN COMMUNICATION BUS 2 ERROR BODY CONTROL MODULE | - |
| U1822 | LOST COMMUNICATION WITH MASTER MAIN SWITCH | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Body Control]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.
- Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.