Data Monitor: List
| Item | Contents | Standard/Unit | Note |
|---|---|---|---|
| IGN Counter | Time stamp information Ref. to COMMON (DIAGNOSTICS)>TIME STAMP . | Time | - |
| Count | - | - | |
| IG-ON Elapsed Time | ms | - | |
| BATT voltage (control) | Constant power supply from the battery. Input value to the body integrated unit. | 0 - 21.5 V | - |
| BATT voltage (BACKUP) | Constant power supply from the battery. Input value to the body integrated unit. | 0 - 21.5 V | - |
| IGN voltage | IG system circuit voltage. Input value to the body integrated unit. | 0 - 21.5 V | - |
| ACC voltage | ACC system circuit voltage. Input value to the body integrated unit. | 0 - 21.5 V | - |
| Front Wheel Speed | Front wheel average speed. CAN data input value. Received from the VDC Control Module. | 0 - 229.5 km/h | - |
| Shift Position | Shift position. CAN data input value. Received from the TCM. | 1 - 3, D-S, D, N, R, P | - |
| Buzzer beeping request | Passenger room buzzer beeping request. CAN data output value. Sent to the combination meter. | Status for 'beeping deactivated' Reverse warning Key warning buzzer Light Remained Buzzer Customize 1 Customize 2 Registration completed 1 Registration completed 2 Registered Registration NG |
- |
| EPB operating status | EPB operating status. CAN data input value, received from the VDC module. | Error Release Operate Operating Releasing Dynamic Parking |
- |
| Illumination Sensor Output | Output voltage from the illumination sensor. Body integrated unit input value. | 0 - 5 V | - |
| Off delay time | Interior light off delay time. Body integrated unit custom setting values. | OFF 10 Sec 20 Sec 30 Sec |
- |
| Auto Light Sensitivity Adjustment | Sensitivity of auto light function. Body integrated unit custom setting values. | Dull Normal Sensitive Very Sensitive |
- |
| key-lock warning SW | ON/OFF status of the key warning switch. Body integrated unit input value. Set to ON when the ignition key is inserted. | ON/OFF | Without keyless access with push button start system |
| ACC Input | ON/OFF status of ACC. Body integrated unit input value. Set to ON when the ignition switch is turned to ACC. | ON/OFF | With keyless access with push button start system |
| Stop Light Switch | ON/OFF status of the brake switch. Body integrated unit input value. Set to ON when the brake pedal is pressed. | ON/OFF | - |
| Front Fog Light SW input | ON/OFF status of the front fog light switch. Body integrated unit input value. Set to ON when the front fog light switch is ON. | ON/OFF | - |
| Driver's door SW input | ON/OFF status of the driver's door switch. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| P-door SW input | ON/OFF status of the passenger's door switch. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| Rear right door SW input | ON/OFF status of the rear right door switch. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| Rear left door SW input | ON/OFF status of the rear left door switch. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| R Gate SW input | ON/OFF status of the rear gate switch. Body integrated unit input value. Set to ON when the rear gate is open. | ON/OFF | - |
| Manual lock SW input | ON/OFF status of the manual lock switch located on the power window main switch. Body integrated unit input value. Set to ON when the manual lock switch is set to lock. | ON/OFF | - |
| Manual unlock SW input | ON/OFF status of the manual lock switch located on the power window main switch. Body integrated unit input value. Set to ON when the manual lock switch is set to unlock. | ON/OFF | - |
| P SW | ON/OFF status of the P range switch. Body integrated unit input value. Set to ON in the P range. | ON/OFF | - |
| R wiper ON SW input | ON/OFF status of the rear wiper ON switch. Body integrated unit input value. Set to ON when the rear wiper switch is ON. | ON/OFF | - |
| R wiper INT SW input | ON/OFF status of the rear wiper INT switch. Body integrated unit input value. Set to ON when the rear wiper switch is in the INT position. | ON/OFF | - |
| R washer SW input | ON/OFF status of the rear washer switch. Body integrated unit input value. Set to ON when the rear washer switch is ON. | ON/OFF | - |
| Fr wiper input | ON/OFF status of the front wiper return switch. Body integrated unit input value. Set to ON when the front wiper is outside of the stop position. | ON/OFF | - |
| Driver's seat lock status SW input | ON/OFF status of the driver's seat lock status switch. Body integrated unit input value. Set to ON when the door status is UNLOCK. | ON/OFF | With keyless access with push button start system |
| Passenger's seat lock status SW input | ON/OFF status of the passenger's seat lock status switch. Body integrated unit input value. Set to ON when the door status is UNLOCK. | ON/OFF | With keyless access with push button start system |
| R Gate Release SW input | ON/OFF status of the rear gate release switch. Body integrated unit input value. Set to ON when the rear gate release switch is pressed. | ON/OFF | - |
| Rr Defogger output | ON/OFF status of the rear defogger relay output. Body integrated unit output value. Set to ON when the rear defogger is activated. | ON/OFF | - |
| lock actuator LOCK output | ON/OFF status of the door lock actuator output. Body integrated unit output value. Set to ON when a lock signal is output. | ON/OFF | - |
| All seat UNLOCK output | ON/OFF status of the all door lock actuator output. Body integrated unit output value. Set to ON when an all door unlock signal is output. | ON/OFF | - |
| D-seat UNLOCK output | ON/OFF status of the driver's door lock actuator output. Body integrated unit output value. Set to ON when a driver's door/all door unlock signal is output. | ON/OFF | - |
| Rear gate/Trunk UNLOCK output | ON/OFF status of the rear gate actuator. Body integrated unit output value. Set to ON when an unlock signal is output. | ON/OFF | - |
| R wiper output | ON/OFF status of the rear wiper relay output. Body integrated unit output value. Set to ON when the rear wiper is activated. | ON/OFF | - |
| Shift lock solenoid output | ON/OFF status of the shift lock solenoid output. Body integrated unit output value. Solenoid is activated to set this item to ON when depressing the brake pedal with the shift lever in P range. | ON/OFF | - |
| Key lock solenoid output | Key lock solenoid output ON/OFF status. Body integrated unit output value. Solenoid is activated to set this item to ON when the key is inserted with the shift lever in other than P range. | ON/OFF | Without keyless access with push button start system |
| wiper deicer output | ON/OFF status of the wiper deicer output. Body integrated unit output value. Set to ON while the wiper deicer is operating. | ON/OFF | - |
| Horn Output | Body integrated unit output value. Set to ON when security warning is operating. | ON/OFF | - |
| Room lamp output | Room light output ON/OFF status. Body integrated unit output value. Set to ON while the room light illuminates with the switch in DOOR position. | ON/OFF | - |
| key illumination lamp o/p | Key illumination light output ON/OFF status. Body integrated unit output value. Set to ON while the key illumination light illuminates. | - | Without keyless access with push button start system |
| Immobilizer lamp output | Immobilizer pilot light output ON/OFF status. Body integrated unit output value. Set to ON while the immobilizer indicator in the combination meter illuminates. | ON/OFF | - |
| Small Light SW | ON/OFF status of the lighting 1 relay CAN output. CAN data sending value. Set to ON when the position light indicator in the combination meter illuminates. | ON/OFF | - |
| Headlamp | ON/OFF status of the lighting Lo relay CAN output. CAN data output value. Set to ON when the headlight Lo illuminates. | ON/OFF | - |
| High Beam | ON/OFF status of the lighting Hi relay CAN output. CAN data output value. Set to ON when the headlight Hi illuminates. | ON/OFF | - |
| Rr Defogger SW | Rear defogger switch ON/OFF status. Body integrated unit input value. Set to ON when the rear defogger switch is ON. | ON/OFF | - |
| Lane change signal setting | Presence or absence of the one-touch blinker control. Body integrated unit custom setting values. | Support/No Support | - |
| Rear wiper auto setting | Presence or absence of the rear wiper control linked with reverse shift. Body integrated unit custom setting values. | Support/No Support | - |
| Left turn signal input | ON/OFF status of the left turn signal switch. Body integrated unit input value. Set to ON while the left turn signal switch is ON. | ON/OFF | - |
| Right turn signal input | ON/OFF status of the right turn signal switch. Body integrated unit input value. Set to ON while the right turn signal switch is ON. | ON/OFF | - |
| Left turn signal output | ON/OFF status of the left turn signal light output. Body integrated unit output value. Set to ON while the left turn signal light illuminates. | ON/OFF | - |
| Right turn signal output | ON/OFF status of the right turn signal light output. Body integrated unit output value. Set to ON while the right turn signal light illuminates. | ON/OFF | - |
| Driver's Door Unlock Setting | Presence or absence of the driver's seat select unlock control. Body integrated unit custom setting values. | Select/ALL | With keyless access with push button start system |
| Rear Gate Unlock Setting | Presence or absence of the rear gate select unlock control. Body integrated unit custom setting values. | Select/ALL | With keyless access with push button start system |
| Daytime Running Light (Alternate System) Output | DRL output ON/OFF status. Body integrated unit output value. Set to ON while the DRL illuminates. | ON/OFF | - |
| Wiper link Auto Light Setup | ON/OFF status of the wiper interlock auto light function control. Body integrated unit custom setting values. | ON/OFF | - |
| Vehicle Automatic Door Lock | ON/OFF of the vehicle auto door lock control. Body integrated unit custom setting values. | OFF/Vehicle Speed/Select Lever P | - |
| Vehicle Automatic Door Unlock | ON/OFF of the vehicle auto door unlock control. Body integrated unit custom setting values. | OFF/Select Lever P/Power OFF/Driver Door Open | - |
| Hood Switch Close-side | ON/OFF status of the hood switch. Turns to ON when the hood is closed. |
ON/OFF | - |
| Hood Switch Open-side | ON/OFF status of the hood switch. Turns to ON when the hood is open. |
ON/OFF | - |
| High Beam Assist Current Setting | Presence or absence of high beam assist. Body integrated unit custom setting values. |
ON/OFF | - |
| High Beam Assist Indicator (Active/Blink) | Set to ON when high beam assist is activated. CAN data output value. |
OFF/ON/Blink | - |
| Electric Fuel Unlock output | ON/OFF status of the electric fuel unlock output. Set to ON when the electric fuel unlock is output. | ON/OFF | - |
| P/W Relay Output | ON/OFF status of the rear seat P/W relay output. Body integrated unit output value. Always ON when the ignition switch is ON (except for when using remote control engine starter). | ON/OFF | - |
| Lighting I Switch Input | ON/OFF status of the lighting 1 switch. Body integrated unit input value. Set to ON while the lighting 1 switch is ON. | ON/OFF | - |
| Lighting II Switch Input | ON/OFF status of the lighting 2 switch. Body integrated unit input value. Set to ON while the lighting 2 switch is ON. | ON/OFF | - |
| Dimmer Hi Switch Input | Lighting Hi switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting Hi switch is ON. | ON/OFF | - |
| Dimmer Passing Switch Input | ON/OFF status of the dimmer Pass switch. Body integrated unit input value. Set to ON while the dimmer Pass switch is ON. | ON/OFF | - |
| Illumination sensor flag | Presence or absence of the illumination sensor. Body integrated unit internal data. | Support/No Support | - |
| Lighting I Lamp Output | ON/OFF status of the lighting 1 relay output. Body integrated unit output value. Set to ON while the position light illuminates. | ON/OFF | - |
| Lighting II Lamp Output | ON/OFF status of the lighting Lo relay output. Body integrated unit output value. Set to ON while the lighting Lo illuminates. | ON/OFF | - |
| Lighting Hi Light Output | ON/OFF status of the lighting Hi relay output. Body integrated unit output value. Set to ON while the lighting Hi illuminates. | ON/OFF | - |
| Front Fog Lamp Output | ON/OFF status of the front fog light relay output. Body integrated unit output value. Set to ON while the front fog light illuminates. | ON/OFF | - |
| Map lamp output | ON/OFF status of the map light output. Body integrated unit output value. Set to ON while the map light illuminates with the switch in DOOR position. | ON/OFF | - |
| Luggage/Trunk lamp output | Luggage light output ON/OFF status. Body integrated unit output value. Set to ON while the luggage light illuminates with the switch in DOOR position. | ON/OFF | - |
| Front wiper AUTO switch input | ON/OFF status of the front wiper Auto switch. Body integrated unit input value. Set to ON when the front wiper Auto switch is ON. | ON/OFF | - |
| Front wiper Low switch input | ON/OFF status of the front wiper Lo switch. Body integrated unit input value. Set to ON when the front wiper Lo switch is ON. | ON/OFF | - |
| Front wiper High switch input | ON/OFF status of the front wiper Hi switch. Body integrated unit input value. Set to ON when the front wiper Hi switch is ON. | ON/OFF | - |
| Front washer switch input | Front wiper washer switch ON/OFF status. Body integrated unit input value. Set to ON when the front wiper washer switch is ON. | ON/OFF | - |
| Front wiper Low output | ON/OFF status of the front wiper Lo output. Body integrated unit output value. ON when the front wiper Lo is operating. | ON/OFF | - |
| Front wiper High output | ON/OFF status of the front wiper Hi output. Body integrated unit output value. ON when the front wiper Hi is operating. | ON/OFF | - |
| Rear left door lock status switch input | ON/OFF status of the rear left lock status switch. Body integrated unit input value. Set to ON when the door status is UNLOCK. | ON/OFF | With keyless access with push button start system |
| Rear right door lock status switch input | ON/OFF status of the rear right lock status switch. Body integrated unit input value. Set to ON when the door status is UNLOCK. | ON/OFF | With keyless access with push button start system |
| Rr Defogger op. mode | Status of the rear defogger operation mode. Body integrated unit custom setting values. | Continuous/Normal | - |
| Security Alarm Setup | Alarm ON/OFF status when the security system is activated. Body integrated unit custom setting values. | ON/OFF | - |
| Alarm delay setup | ON/OFF status of the alarm monitoring delay function. Body integrated unit custom setting values. | ON/OFF | - |
| Lockout prevention | ON/OFF status of the key lockout prevention function. Body integrated unit custom setting values. | ON/OFF | - |
| Buzzer sounding setting | ON/OFF status of the answer-back buzzer sounding. Body integrated unit custom setting values. | ON/OFF | - |
| Abnormal warning lamp flashing setting | ON/OFF status of the hazard answerback. Body integrated unit custom setting values. | ON/OFF | - |
| Dome Light Alarm Setting | ON/OFF status of the room light illumination when the alarm is activated. Body integrated unit custom setting values. | ON/OFF | - |
| wiperdeicer | Presence or absence of the wiper deicer. Body integrated unit custom setting values. | Support/No Support | - |
| Destination Setting | Vehicle destination information. Body integrated unit internal data. | JPN KA, KC KS EU LHD Other than KS Canada (C0, C5) U.S. (U4, U5, U6) EK, ER |
- |
| Illumination Sensor Setting | Presence or absence of the illumination sensor. Body integrated unit custom setting values. | Support/[No Support] | - |
| Factory initial setting | Factory/Market mode status. Body integrated unit custom setting values. | Market/Factory | - |
| Sunroof setting | Presence or absence of sunroof. Body integrated unit custom setting values. | Support/No Support | - |
| Welcome Light Off Delay Time (Approaching) |
Time setting to turn off the light for the welcome lighting (approaching) function. Body integrated unit custom setting values. | OFF 30 Sec 60 Sec 90 Sec |
- |
| Welcome Light Off Delay Time (Exiting) |
Time setting to turn off the light for the welcome lighting (exit) function. Body integrated unit custom setting values. | OFF 30 Sec 60 Sec 90 Sec |
- |
| Keyless Buzzer Volume | Volume of the keyless buzzer. Body integrated unit custom setting values. | 1 - 7 | With keyless access with push button start system |
| Hazard switch Input | ON/OFF status of the turn hazard switch input. Body integrated unit input value. Set to ON when the turn hazard switch is ON. | ON/OFF | - |
| Towing switch input | Towing switch ON/OFF status. Body integrated unit input value. Set to ON when the towing switch is ON. | ON/OFF | - |
| Auto Dimmer Cancel setting | Sensitivity of auto dimmer cancel function. Body integrated unit custom setting values. | 0 (OFF) Least Less Normal More Most |
- |
| Alarm Operation History | History of alarm operation. | None ALARM by opening any of the door ALARM by opening the trunk lib ALARM by opening the hood |
- |
| IGN time (Alarm) | Time stamp information at alarm operation. | 0 - 65535 Time | - |
| Immobilizer Set Memory | Remote immobilizer status. | Set/Unset | Without keyless access with push button start system and Other than for C5 |
| Buzzer Output Pattern Request | External buzzer beeping request. CAN data output value. Sent to the front relay control module. | Keyless Buzzer Request Keeping/Keyless Buzzer Request Pattern1/Keyless Buzzer Request Pattern2/Keyless Buzzer Request Pattern3/Keyless Buzzer Request Pattern4/Keyless Buzzer Request OFF/Buzzer Output (Answer-back) Pattern1/Buzzer Output (Answerback) Pattern2/Buzzer Output (Answerback) Pattern3/Buzzer Output (Answerback) Pattern4/Buzzer Output (Answerback) Pattern5/Buzzer Request Pattern1 Before Auto Lock/Buzzer Request Pattern2 Before Auto Lock |
- |
| Battery Power Supply Output for Interior Lights | ON/OFF status of the room light power supply relay output. Body integrated unit output value. | ON/OFF | - |
| Light LIN setting | Presence/absence of Light LIN. Body integrated unit custom setting values. | Support/No Support | - |
| Lighting OFF Switch Input | ON/OFF status of the lighting OFF switch. Body integrated unit input value. Set to ON during the lighting OFF switch operation. | ON/OFF | - |
| Security Horn Output Setting | Security horn sound. Body integrated unit custom setting values. | Support/No Support | - |
| Manufacturing Traceability | Manufacturing traceability information. Body integrated unit internal data. | - | - |