LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Impreza Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control/Communication System >> Central Gateway Control Module >> Removal

Central Gateway Control Module: Removal

NOTE: Components: Ref. to BODY CONTROL/COMMUNICATION SYSTEM>GENERAL DESCRIPTION>COMPONENT>CENTRAL GATEWAY CONTROL MODULE .
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the driver monitoring unit. (Model with driver monitoring system) Ref. to INSTRUMENTATION/DRIVER INFO>DRIVER MONITORING UNIT>REMOVAL .
  3. Remove the panel assembly center. Ref. to EXTERIOR/INTERIOR TRIM>CENTOR CLUSTER>REMOVAL .
  4. Remove the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>REMOVAL .
  5. Remove the central gateway control module.
    CAUTION: Be careful to keep water and other foreign materials away from the central gateway control module terminals.
    1. Remove the screws.
    2. Pull out the central gateway control module.
      G14612864Courtesy of SUBARU OF AMERICA, INC.
    3. Disconnect the connector.
    4. Remove the central gateway control module.
scientia non olet · About LEMON Manuals