LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Forester Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) >> Air Cleaner Case >> Installation

Air Cleaner Case: Installation

  1. Install the air cleaner case bracket and install the cushion.
    NOTE: Align the protrusion of the cushion with the cutout portion on the air cleaner case bracket.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the air cleaner case (front).

    Tightening torque: 

    Bolt 

    6 N.m (0.6 kgf-m, 4.4 ft-lb)

    Nut 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the air cleaner element and the air cleaner case (rear). Ref. to INTAKE (INDUCTION) (H4DO)>AIR CLEANER ELEMENT>INSTALLATION .
  4. Connect the air intake boot.

    Tightening torque: 

    3 N.m (0.3 kgf-m, 2.2 ft-lb)

  5. Connect the connector to the mass air flow and intake air temperature sensor, and secure the harness with clip.
  6. Install the air intake duct. Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE DUCT>INSTALLATION 
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals