Basic Diagnostic Procedure: Procedure

Ask the customer when and how the trouble occurred using the Check List for Interview. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>CHECK LIST FOR INTERVIEW .

Did you interview the customer?

Yes  : GO TO  2.

No  : Perform the interview, and GO TO  2.

Perform inspection of general description. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>GENERAL DESCRIPTION>INSPECTION .

Is the check result OK?

Yes  : GO TO  3.

No  : Repair the faulty part found in basic inspection, and GO TO  3.

1. Turn the ignition switch to OFF.
2. Connect the Subaru Select Monitor to data link connector. Ref. to COMMON (DIAGNOSTICS)>DATA LINK CONNECTOR .
3. Turn the ignition switch to ON and run the Subaru Select Monitor.
4. Select [Cockpit Control].
   NOTE: For detailed operation procedures, refer to "Help" of application.

Is communication possible?

Yes  : GO TO  4.

No  : Check the communication circuit. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE FOR SUBARU SELECT MONITOR COMMUNICATION>INSPECTION .

Read the DTC of [Cockpit Control] using the Subaru Select Monitor. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

Are any DTCs displayed? (Current code)

Yes  : Record the DTC, time stamp and freeze frame data, and GO TO  5.

No  : Perform diagnosis according to the procedures in the diagnostics with phenomenon. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON .

1. Perform the diagnosis for the displayed DTCs. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
2. Repair or replace the cause of trouble.
3. Using the Subaru Select Monitor, perform the clear memory of [Cockpit Control]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY .
4. Execute the inspection mode. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>INSPECTION MODE .
5. Read the DTC of [Cockpit Control] using the Subaru Select Monitor. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

Are any DTCs displayed? (Current code)

Yes  : Repeat step 5 until DTC is not shown. GO TO  5.

No  : Finish the diagnosis.