Power Amplifier: Installation

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .

NOTE: The power amplifier assembly is installed under the front seat RH. Install the power amplifier assembly after sliding the front seat RH back and forth as necessary.

Install the power amplifier assembly.
1. Connect each connector.
2. Install the power amplifier assembly.
  Tightening torque:
  
  7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .