LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Ascent Limited >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering System >> Steering Wheel >> Removal

Steering Wheel: Removal

CAUTION: Before handling the airbag system components, always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Set the tire to the straight-ahead position.
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the driver's airbag module. Ref. to AIRBAG SYSTEM>DRIVER'S AIRBAG MODULE>REMOVAL .
  4. Remove the steering wheel.
    CAUTION:
    • Always use the steering wheel puller for removal to avoid deforming the steering wheel.
    • If the steering wheel has been removed, make sure that the steering roll connector is not turned from the original position.

    Preparation tool: 

    Steering wheel puller

    1. Disconnect the connector and remove the nut.
    2. Put an alignment mark (a) using a ruler as shown in the figure, and remove the steering wheel.
      G16389921Courtesy of SUBARU OF AMERICA, INC.
      (A) Model with steering heater
scientia non olet · About LEMON Manuals