Check Motor Operation
- Apply battery voltage between the outer mirror connector terminals and check the mirror operation.
Model without seat position memory
Terminal No. Inspection conditions Switch position - - OFF 5 (+) - 6 (-) Apply battery voltage between terminals. UP 6 (+) - 5 (-) Apply battery voltage between terminals. DOWN 4 (+) - 5 (-) Apply battery voltage between terminals. LEFT 5 (+) - 4 (-) Apply battery voltage between terminals. RIGHT Model with seat position memory
- Model without electric retraction system
Terminal No. Inspection conditions Switch position - - OFF 1 (-) - 10 (+) Apply battery voltage between terminals. UP 1 (+) - 10 (-) Apply battery voltage between terminals. DOWN 10 (-) - 9 (+) Apply battery voltage between terminals. LEFT 10 (+) - 9 (-) Apply battery voltage between terminals. RIGHT - Model with electric retraction system
Terminal No. Inspection conditions Switch position - - OFF 12 (+) - 1 (-) Apply battery voltage between terminals. UP 1 (+) - 12 (-) Apply battery voltage between terminals. DOWN 11 (+) - 12 (-) Apply battery voltage between terminals. LEFT 12 (+) - 11 (-) Apply battery voltage between terminals. RIGHT - If it does not operate normally as the result of inspection, replace the outer mirror assembly.