Keyless Access Control Module: Removal

1. When replacing the keyless access Control Module, store the [Keyless Access with Push Button Start(Collation)] customizing information. Ref. to COMMON (DIAGNOSTICS)>CUSTOMIZE>OPERATION > SAVE SETTINGS / READ SETTINGS
2. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
3. Remove the cover side sill front FR and the cover side sill front RR. Ref. to EXTERIOR/INTERIOR TRIM>LOWER INNER TRIM>REMOVAL .
4. Remove the pocket COMPL and the panel instrument passenger. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>REMOVAL .
5. Remove the keyless access Control Module.
   CAUTION: Be careful to keep water and other foreign materials away from the keyless access Control Module terminals.
   1. Remove the bolts and pull out the keyless access Control Module.
   2. Disconnect the connector.

Courtesy of SUBARU OF AMERICA, INC.