LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> WRX Base, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Crossmember Support >> Installation

Crossmember Support: Installation

  1. Install the crossmember support front.

    Tightening torque: 

    60 N.m (6.1 kgf-m, 44.3 ft-lb)

  2. Install the crossmember support rear.

    Tightening torque: 

    70 N.m (7.1 kgf-m, 51.6 ft-lb)

  3. Install the under guard front. (When the crossmember support front was removed) Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>INSTALLATION .
scientia non olet · About LEMON Manuals