LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> WRX Base, Standard Trans >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Universal Joint >> Removal

Universal Joint: Removal

  1. Set the steering wheel to the straight-ahead position.
  2. Adjust the tilt position of the steering column to the neutral position.
    NOTE: Place the tilt lever to the lock position after the steering column is adjusted.
  3. Prevent the steering wheel from turning using the seat belt.
    G11245584Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the universal joint assembly steering.
    1. Place an alignment mark between the column assembly steering and universal joint assembly steering.
    2. Remove the bolt, and remove the universal joint assembly steering.
      CAUTION: Do not remove the guide camera.
      G14612018Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals