LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System (Tr690) >> Secondary Speed Sensor >> Installation

Secondary Speed Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of secondary speed sensor, replace it with a new part.
  1. Install the secondary speed sensor using a new O-ring, and connect the connector.
    NOTE: Apply CVTF to the O-rings.

    Tightening torque:  5 N.m (0.5 kgf-m, 3.7 ft-lb)

  2. Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals