Sunroof Switch: Inspection

Measure the resistance between connector terminals.

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.

Connector	Terminal No.	Inspection conditions	Standard
(b): Slide switch	1 - 3	OPEN	Less than 1 Ω
(b): Slide switch	4 - 3	CLOSE	Less than 1 Ω
(a): Tilt switch	4 - 3	Tilt down	Less than 1 Ω
(a): Tilt switch	1 - 3	Tilt up	Less than 1 Ω

Replace the sunroof switch if the inspection result is not within the standard value.