Sunroof Assembly: Installation

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .

Install the tube drains.
Install the mat trunk and the trunk trim panel side. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>INSTALLATION .
Install the bracket sunroof and the rail assembly.
Tightening torque:

6 N.m (0.6 kgf-m, 4.4 ft-lb)

Connect the connector of the tube drain and the motor assembly.

CAUTION:

Insert the drain tubes on the front side until they contact all the way to the end (a) of drain pipes.

Courtesy of SUBARU OF AMERICA, INC.

For the drain tubes on the rear side, securely insert the resin connector until a clicking sound is heard.

Install the bolt which secures the curtain airbag module.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the trim panel roof assembly. Ref. to EXTERIOR/INTERIOR TRIM>ROOF TRIM>INSTALLATION .
Install the lid assembly. Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>GLASS LID>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .