Malfunction Of Tilt Operation

1. Turn the ignition switch to OFF.
2. Disconnect the power seat switch connector.
3. Measure the resistance between connector terminals when moving the switch to tilt up and tilt down. Ref. to SEATS>POWER SEAT>INSPECTION>POWER SEAT SWITCH .

Is the inspection result normal?

Yes:  Go to  2.

No:  Replace the power seat switch assembly. Ref. to SEATS>POWER SEAT .

1. Disconnect the tilt motor connector.
2. Measure the resistance between power seat switch connector and tilt motor connector.

   Connector & terminal 

   Except for RECARO® seat 

   (St52) No. 14 - (St68) No. 6: 

   (St52) No. 15 - (St68) No. 4: 

   RECARO® seat 

   (St52) No. 2 - (St68) No. 6: 

   (St52) No. 3 - (St68) No. 4: 

Is the resistance less than 10 Ω?

Yes:  Go to  3.

No:  Check power seat harness.

1. Connect the power seat switch connector and tilt motor connector.
2. Apply battery voltage to the tilt motor and check the motor rotation.

   Connector & terminal 

   (St68) No. 6 (+) - (St68) No. 4 (-): 

   (St68) No. 4 (+) - (St68) No. 6 (-): 

Does the motor rotate normally?

Yes:  Check for temporary poor contact or mechanical trouble in tilt mechanism.

No:  Tilt motor problem. Replace the seat cushion frame assembly.